FAG Angular contact ball bearing units - ZKLR2060-2RS

FAG Angular contact ball bearing units - ZKLR2060-2RS
Rolling and plain bearings, accessories ZKLR..-2RS ZKLR2060-2RS
[Angular contact ball bearing units ZKLR2060-2RS
[double direction, for screw mounting, lip seals on both sides
||||||

		FAG Angular contact ball bearing units - ZKLR2060-2RS Accessories
Axial abutment area of outer ring Design of adjacent construction Stated geometrical tolerances only required in diameter area between D ai and D aa.		d 20 mm Tolerance: 0/-0,008 D 50,45 mm Tolerance: +0,03/-0,01 H 30 mm Tolerance: 0/-0,5 A1 60 mm A2 60 mm B 28 mm Tolerance: 0/-0,25 Daa min 47 mm Dai 39 mm d1 24,4 mm d2 6,6 mm da 24 mm m 47 mm n 47 mm rmin 0,3 mm X Axial abutment area of outer ring m 300 g Mass Cr 28000 N Basic dynamic load rating, radial C0r 19100 N Basic static load rating, radial Ca 27500 N Basic dynamic load rating, axial C0a 40000 N Basic static load rating, axial Cur 970 N Fatigue limit load, radial nG Fett 11700 1/min Limiting speed for grease lubrication MRL 0,3 Nm Bearing frictional torque caL 250 N/µm Axial rigidity Statistically determined mean values from measurements on the complete bearing. Mm 0,263 kg * cm^2 Mass moment of inertia for rotating inner rings 8 µm Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring. ZM20 Designation of recommended INA locknut The locknut is used to axially locate the bearing unit. It has no influence on the bearing preload. Locknuts must be ordered separately. MA 18 Nm Tightening torque Only valid in conjunction with INA precision locknuts 4 Number of fixing screws to DIN 912 Screws not included in scope of delivery. M6 Size of fixing screws to DIN 912 Tightening torque of fixing screws according to manufacturer's data. Screws not included in scope of delivery.